LISK (Step 1) Again the same scan is applied as in Wave front.
This method is very different from the first two methods of surgical methods. The LIZK PRK /
Corneal thickness is not folded, but the surface layer of the cornea is removed and replaced. This is followed by actual laser therapy. Finally, a protective lens that is removed as soon as the corneal layer is used and reconstituted itself again.
This method is mostly used with patients who have a lower thickness of the corneal layer (wafer). Therefore the old lysik method is recommended for patients with the above problems only.
Femto-Lasik (Intralase Lasik)
And in Wavefront Front if you are not suitable for measurements
Leslie Interals is applying this new technique to treat eyesight such as myopia, D-look and astigmatism. This involves lifting the slice of the cornea by laser light. The thickness and thickness of this corneal layer is determined before the operation. Intralase reduces the risk during the production of the corneal chip. Interliz Lizk gives us the option to create chips on demand and increases the success of this treatment. The production of corneal wafer using Interalasek can be done according to the preferences of each individual patient. Doctors will tell you about other possibilities.
With Interalasek treatment, the instruments are used only once. This reduces the risk of infection to zero.
It is possible, for the first time, to perform the process steps one by one to suit the patient. It enables him to adapt to specific features that allow correcting the defective vision and leads to the optimal result: better vision.
The IESC method used has been tested and proven to be very safe, even today, the US Army and NASA have given support for applying the treatment to astronauts and air force pilots. This support proves that the iLiC method gives the best results even to people who have the ability to possess a very strong visual talent such as astronauts and pilots, who are exposed to exceptional natural conditions.
Your treatment path:
Step 1: Using a 3D front-end measurement – we get an analysis of the “DNA” from the eye and take it into consideration during corneal treatment.
Step 2: IELAC treatment uses the latest technology. It is applied to the cornea. The chip is produced without cutting. Ensures excellent result. Laser surgery using interferometers accelerates improvement after surgery. Vimto contactless laser allows the preparation of optimally designed chips from the cornea with rapid wound healing.
Step 3: Laser Eye Treatment: After wave scanning technology, your personal information is created using other innovative technology without cutting your corneal chip. Now your vision will be improved within the treatment range with advanced technology. Everything meets the principle of personal visual quality
The Ecximer Laser System
The treatment is ensured by combining it with the Wavefront analysis, automatic identification of the entire iris as well as variable spot scanning and variable laser flicker
Aberfronteter Wavefront and LanFront analysis of the Apometric
The lysik also sounds
The combination of isk and wavefront is combined in the LASIK process
1 – the analysis of the front-wave Aberrometer
- Prepare corneal lamina with femtosecond laser
3 – correction of the frontal front wave
The dimension of the eye is measured across the frontal wave in more than 200 different points. This information matches your fingerprint.
The surgeon determines the size and location of the corneal surgeon.
Why is the band wave analysis?
L aberrometre method of action
Used in frontal wave analyzes is the Aberrometer Diagnostic Device
A special laser that can treat abnormalities and anomalies in the eye Aberrometer
Work as follows Aberrometer
The total refraction of the eye, Aberrometer, is a source of the beam in the eye and focuses on the retina in each beam and analysis. Study of the Jade Wave by
When the light is selected for treatment, the Excimer 3D technique can detect and classify optical defects to guide the laser
Disadvantages are captured and recorded on a map which correspond to the graphical representation of all distortions in the visual system and are often referred to as an eyeprint.
Wavescan wave system
The use of abrometer-type Hartmann Shaik
An immediate analysis that recorded about 240 points of various data which is estimated at 100% of the Fourier transform (the frontal wave on the Fourier base provides the best data) ensures high accuracy.
Corneal surgery by Laser Femto Secund
The Spamond Vimeto Laser is an infrared laser 1053 mm), it works with a very small spot size and is enhanced by a precipitation of 1/100 mm, its pulse is very short 1 femtosecond = 10-15s = 0.000.000.000.000.001 x.
In the femtolumographic laser the femtosecond is used in cutting the cornea. In the Elazic or Vimto Lazik method, the Vimto Spacond (a computerized and independent method) compensates micro-keratom (manual mechanical method), which was traditionally in the first Azik methods of corneal surgery,
The Vimto Spconde laser is also used as a correction in the curvature of the cornea, to cultivate inside the cornea in the ring part or also to cultivate the cornea
(Flap) The Vimto Spcond laser ensures the stability of the cornea
Better wound healing and increased mechanical stability. Where laser cutting drives a little distractions, Vimto-Lasik offers much better results. The safety of the operation is also increased by avoiding complications associated with surgery.
Correction of the frontal wave – the laser of the enzyme
(VISX STAR S4 IR Laser Excimer)
A method with eczemer laser in combination with a frontal wave analysis (aborremetrie)
Individual treatment ensures automatic detection of iris and variable scanning
(VSS) Laserpuls-Rate (VRR)
The Izmir Eximer in the 70 years belongs to the UV group. The pulses produce a mixture of gas at very high pressure, composed of a high voltage charge of 25,000 volts.
By selectively setting the laser pulses, the cornea can be modeled so that existing refractive errors such as hyperopia, astigmatism and visual defects are achieved. This process is called photo eradication.
The advantage of the FIX START X4R laser
VISX STAR S4 IR laser Excimer
Automatic recognition of the iris
Iris pattern is a unique feature – such as a genetic fingerprint – when a scan is taken before the surgery of the iris when the patient sits, and can correct the eye also when lying down.
By identifying the iris evidence (obtained during the frontal wave analysis) can be correctly placed in the cornea when the patient is lying down. Ada recognition on the iris is the basis for proper direction of treatment.
VRR VSS Variable Frequency Variable Spot Scanning Variable
First, the laser beam was used with a large diameter, the current modern equipment operates with a very small diameter laser beam and is transmitted at high frequencies flying spot on the cornea
Through a retrospective mechanism and we can know at what stage the corneal tissue was removed through the laser after a comprehensive removal of the corneal tissue is impossible to touch the same place again g
Includes a variable beam beam that may vary in diameter from 0.65 mm to 6.5 mm. VISX STAR S4 IR LASER LASER
Such as an adjustable laser pulse rate of 6 20 20 هز. So the same result can be obtained with less corneal removal.
This is especially for patients with a weak cornea
Active 3D Track – Eye Tracking System
Is an essential element of the modern laser system. Oculometre eye tracking system
Detect all eye movements, even small and involuntary, and this speed of light: Oculometre eye tracking system
Ultra-sensitive sensors and cameras monitor the pupil’s position approximately 120-240 per second.
Sends a laser signal and indicates a change in location. Oculometre when the process of moving the patient’s eye or head
The laser adjusts the personal removal with the new state of eye movement (and thus lightning speed).
. X and Y are the only ones capable of maintaining horizontal and vertical movements in the Oculometre axis
Is a laser that includes iris recognition, VISX STQR S4 IR technology such as modern polymers
It also allows for the circular movement of th
Lizk Relex – smile
Treatment: Correcting the lower eyelid by using the latest Relex smile and the latest laser technology currently in Dunya Goz Hospital.
An innovative and final model of the Hight-End laser Doniaqoz Hospital offers laser eye surgery with this procedure
. Femtoseconde Vismax de Zeiss
The soft and safe RILIX-SMIL enables the correction of refractive errors of up to 10 diopteropia and astigmatism up to 5 diopters. The RlexSmile method replaces the traditional lysik method and provides the first Vimto Lasik process, as well as the laser eye so that it is used only with the Vimto Secund laser.
Therefore, it is often referred to as a third-generation laser. With this method, Laser Eye Surgery is performed with the LaserSecond Visomax laser.
Therefore, a cornea lens is prepared without bending the cornea. Then, the minimum edge cutter is applied with the femtos laser that is removed during the lentucule solution
Traditional Lasik / Vimto Lasik surgery includes a large incision and opening of the upper layer of the cornea (riba) and then omitted
This method is very suitable for patients with soft cornea, dry eye and high refractive errors
You will find the advantages of this unique Rolex-Smile method.
Without: Rolax-Smile returns the world and refractive surgery head capers .volets
When 20 mm of length is cut earlier, a small incision of about 4 mm is enough for the Rolex Smail.
This has the advantages of reversing LASIK: because there are no plates, and can not slip after the operation in the early days
There is no wide opening of the cornea during laser eye treatment, which excludes environmental influences such as corneal dryness, which quickly brings a number of treatments to the variable or under the patch. Reducing the symptoms of dry eye, but not resolved because it should check the inflammation and adhesions capped edge of the lid and on the edge of the plates also should be avoided.
High friction of the eyes can not cause a sliding element, this problem may occur but rarely after natural lysik. Correction with high accuracy – even in high refractive errors.
With Relix Smile, the exclusive Fuso Max focus is placed on Carl Zeiss precision and the most advanced features of Vimto Sucand technology.
Convenient and fast – complete treatment with one laser. One-step processing
Combines a number of factors that go hand in hand.
Laser therapy is a complete treatment
Slowly – with reduced processing time
Comfort and noise
Stable – regardless of surrounding conditions or corneal characteristics.
Relax Smile for Neuromuscular and Astigmatism:
Characters: 0.50 to 10.00 d
Equivalent to football: 0.75 to 10.00 d
Surgical procedures and surgical procedures by reflex method:
Relax Smile is a laser eye treatment performed at the outpatient clinic. The eye that will be treated will be numb with droplets inside the eye. The process takes minutes and is painless.
In the first capacity of the process can occur a little itching, and the scarcity is not clear, after a day is normal and normal as normal.
In the first weeks
Few changes in vision can occur.
In the latter you get an excellent overall vision after 4 to 6 weeks. The VinceMax Lazer Vimto Secund is first cut in the cornea intact, a thin lens then entering the tunnel at a minimum.
In the tunnel, this approach can be found in the lens nucleus.
The special advantage is that the cornea, when corrected by its natural structure, leads to a much faster recovery than the visual results and the stability of the cornea. The tissue does not evaporate in time, as in laser eximer.
Risks of Relax Smile:
– Risks can be reduced to a minimum, but not completely excluded.
The way of KAMARA İnlay
Field of application:
The KAMRA Inlay method is used
The sight of the elderly (aging). You are probably aware of the first salient symptoms that appear with age:
You have difficulty reading newspapers, difficulties in decoding text messages on your mobile phone, and problematic reading of price stickers in the supermarket … so every day in your life becomes more difficult. However, reading glasses for active people is not always an option.
Examples of treatment options available to you include correcting the sight of the elderly (aging), but the correction can be done across the lysik,
, Or even lens implants in previous years. PRK treatment
KAMRA Inlay However, the merger is also available which you can do two treatments at once like exchanging lenses
It is a very small (black) disc made of special plastic with a hole in the middle. At first glance, the front looks like a nail nut.
Its thickness is only about 0005 mm and its diameter is about 3.8 mm.
The central aperture in the center is about 1.6 mm in size. We conclude from the measurements that the KAMRA Inlay
Therefore smaller than normal contact lenses.
The Inlay KAMRA surface is created
So that there are no very accurate holes visible to the eye. This is necessary so that the function and health of the cornea are maintained.
A similar principle to the camera uses KAMRA Inlay
– It’s like a small cover that is reached by it to a much more effective depth of vision. The good thing is that you only see the nearby objects sharply – but also those in the distance. More than two telescopes can be compensated in this way.
However, generally one eye can be treated using this method – usually an eye that does not have a predominant characteristic. “
Cultivation of lenses
CLE – ICL – Lens implants:
Field of application:
Lens implantation is a complete replacement of the lens. This treatment is used when other methods are not appropriate. This is generally the case with cataract (cataract), but also for example, if your vision is strongly visible. Or when your lens loses its elasticity and thus leads to poor vision of the elderly. The location and extent of your suitability are determined for lens implantation.
Technologies and functions:
Remove the Clear Lens CLE
With this difference, the focus of the lens changes. This is achieved by removing your completely natural lens and replacing it with a lens inside the eye IOL
The method used here is called CLE
This method is especially suitable if your age is greater than 40 years. The reason is usually associated with senile aphasia. In this case, elastic lenses are used that also compensate for these refractive errors.
This way the optimal lens will be located for you during the preliminary examination.
Implantation of contact lenses
ICL lenses are basically contact lenses that are implanted
The difference between this is the CLE method
Is that special natural lenses are not removed but will be supplemented by implanted contact lenses. So you do not need extra care for these lenses. Because it is durable and lasts for a lifetime.
This method can be used for example even for very high refractive errors, since lysik is often not possible. Treatment in a CLE and Contrast Method
In which younger patients can receive this treatment. Therefore, this method is recommended for those under the age of 21 years.
However, it is not correctable from senile pallor with implanted contact lenses